The Type I

The Type I

The BRENTWORTH Type I loudspeaker utilizes a single 6.25 inch (158 mm) dynamic driver and BSL's proprietary loading system to achieve spectacular results. None of our loudspeakers employ crossovers. Instead, the enclosure design manages the driver to provide optimal damping at all frequencies. Elimination of the crossover has many benefits. Group Delay and Phase distortion are virtually eliminated, the complex impedances introduced by crossovers are eliminated, and the power losses of the crossover are eliminated.

The results are a speaker with exceptional transparency, integration and efficiency. The entire musical spectrum is connected. The transient response adds an entire dimension to the audio experience. The flat impedance makes the Type I a very easy speaker to drive.

Acoustic Specifications

Frequency Response: 50 Hz - 20 kHz +- 3db
Sensitivity: 100 dB 1 watt input @ 1 meter
Input Impedance: 5 ohms non-reactive load
Recommended Amplifier power: 3 watts to 100 watts
Crossover Type: NONE
Driver Compliment: One 6.25 (158 mm) full range transducer
Loading System: Proprietary Dynamic Loading Enclosure
Connections: Solid Oxygen free copper binding posts with minimal internal silver wiring

Physical Specifications

Height 42.5 inches (108 cm) with stands
Width 9.25 inches (23.5 cm)
Depth 12.75 inches (32.5 cm)
Weight 82 lbs. (38 kg)